3 piece Hollow Tubular Frame
Ground/Earth Internally
Width 510mm 640mm 760mm 1020mm
Length 760mm 900mm 1070mm 1520mm
Change Cross Pieces in Seconds
Hang Parts from Both Sides - staggered
Crossbars spaced at 102mm intervals
EZ-JIGS
PRODUCED BY MIGHTY HOOK®, USA
|
3 piece Hollow Tubular Frame Ground/Earth Internally Width 510mm 640mm 760mm 1020mm Length 760mm 900mm 1070mm 1520mm Change Cross Pieces in Seconds Hang Parts from Both Sides - staggered Crossbars spaced at 102mm intervals
|
|
The Frame
Vertical sides are constructed from 19mm box section with crossbar hanging holes spaced at 102mm . Other sizes available to custom order.
The top is constructed from 16mm box section to slip easily into the wider vertical sections then fixed with a cotter pin or split pin. There are three top hanging holes to allow for single or double position jig to pendant hanging.
EZ-BARS™
|
EZ-BARS™ and HANG BARS The diagram shows the most important attributes of these bars - good grounding/earth. The design allows spring steel hooks to be snapped into position for many cycles through your process. The hooks can then be removed to leave a clean spot for a good contact for the replacement hook. |
 |
|
EZ-BAR™-LT Manufactured from 1.2mm gauge steel with 12.7mm horizontal and vertical sections and 30mm hook spaces |
 |
|
EZ-BAR™-HV Manufactured from 1.8mm gauge steel with 16mm long horizontal sections and 38mm long vertical section and 50.8mm hook spaces. |
| <<Contents | <Previous | Next> |