|
We will construct your special fixture with interchangeable wire arms. The wires, which are available in different shapes and thicknesses (1.0-6.0mm), are pushed through the silicone rubber masking cap into a hole in the base where the earthing is always perfect. Ask for a quotation!
|
 |
DV = Cranked end
| Part Code | Qty per Box | |
|---|---|---|
| 030x1.5 H DV |
|
|
| 050x1.5 H DV |
|
|
| 030x2.0 H DV |
|
|
|
|
|
|
|
|
|
|
| 050x2.0 H DV |
|
|
| 050x3.0 H DV |
|
|
|
|
|
| A variation of our socket suspenders, where a specially made wire clasp is inserted into an oval tube. The opening is protected by a silicone rubber mask. The clasp can be shaped with two stabilising suspension points for one product, or by using the ends of the wire in a clamping or bracing position. The suspender can be designed as a general suspender or custom-made to suit a specific product. Ask for quotation! |
 |
|
Suspension system for lightweight components, consisting of a welded special suspender in 6mm wire. The wire has transverse grooves with a hook centre to hook centre distance of 15mm. Our locking hooks in 1.0mm spring wire fit into this groove. To protect it from being coated with powder, The "Arms" of the suspender can be covered with a special silicone rubber strip. This must be removed when replacing the hooks. The suspender provides stable suspension points, is easy to use and is designed for optimum use of space. Ask for quotation!
Part code. SL6 |
 |
| This suspender design consists of a pipe with a number of holes where loose, special wire hooks are inserted. Contact is maintained inside the pipe, and each hole can be protected from paint by using a piece of tape which is replaced regularly. Alternatively, a piece of silicone rubber tube can be threaded over the entire pipe. If no protection is used, the holes can easily be opened up by a drill after a few applications. The pipe can be round oval or square, depending on preference. Paint can be removed from round piping by using a lathe. Ask for a quotation! |
 |
| The band is made by clipping and bending "tongues" along the edge of steel band. The shape of the tongues, and c/c distance can be altered, as can the total length of the steel band. Suspenders can be used for section, mouldings and various small components. The band can be suspended from a normal hook or welded or screwed to a more complex suspender. Ask for a quotation! |
  |
| For products in magnetic material that have no other natural means of suspension. The magnets are fixed to suitable special suspenders in various ways and can be protected from paint with special silicone rubber masking or masking tape. Note that the magnets can produce an intense cooling effect, as well as that the magnetic field could affect the powder/colour locally. Ask for a quotation! |
 |
 |
 |
| To suspend straight wires with a minimum of suspension marks, they can be pushed into a square, die punched hole that only leaves four small suspension marks. The force of gravity locks the products into position. Ask for a quotation! |
|
| <<Contents | <Previous | Next> |
