Conical Stoppers

Available in both Silicone (300°C) and EPDM.(180°C). Conical shaped stoppers to plug threaded and non-threaded holes during Powder Coating,Painting and Electro-plating.

Fits thread	Part Code *Non-Stock	d-D mm	L mm	Qty per pack
	STS 0062x0625	0.4 < 1.6	15.9	1000
	STS 0078x1000	0.5 < 2.0	25.4	1000
	STS 0100x0625	0.8 < 2.5	15.9	1000
	STS 100x1000	0.8 < 2.5	25.4	1000
M3	STS 0125x0625	1.6 < 3.2	15.9	1000
M4	STS 0187x0625	1.6 < 4.7	15.9	1000
-	STS 0187x0750	1.6 < 4.7	19.1	1000
-	*STS 0197x1100	1.2 < 5.0	19.1	1000
-	*STS 0200x0750	1.6 < 5.0	19.1	1000
M5	STS 0250x0750	3.2 < 6.4	19.1	1000
-	STS 0250x1000	3.2 < 6.4	25.4	1000
M6	STS 0343x0625	4.7 < 8.7	15.9	1000
-	STS 0343x1000	4.7 < 8.7	25.4	1000
M8	STS 0375x0750	6.4 < 9.5	19.1	500
-	*STS 0375x1250	3.2 < 9.5	31.8	500
-	*STS 0394x1890	5.0 < 10.0	48.0	500
M10	*STS 0437x1000	6.4 < 11.1	25.4	500
-	*STS 0438x0688	8.7 < 11.1	17.5	500
M12	*STS 0472x0748	9.0 < 12.0	19.0	500
-	STS 0500x0813	8.0 < 12.7	20.7	250
-	*STS 0500x2000	3.2 < 12.7	50.8	250
M14	*STS 0563x1000	9.5 < 14.3	25.4	250
-	STS 0590x1000	10.0 < 15.0	25.4	250
M16	*STS 0625x0813	11.1 < 15.9	20.6	250
-	*STS 0656x1000	16.7 < 12.7	25.4	250
M18	STS 0669x1000	13.0 < 17.0	25.0	250
M20	STS 0748x1000	14.0 < 19.0	25.0	250
-	STS 0787x1000	16.0 < 20.0	25.0	100
-	STS 0945x0750	19.2 < 24.0	19.1	100
-	STS 0946x1181	18.0 < 24.0	30.0	100
-	*STS 0990x0795	22.4 < 25.1	20.2	100
-	*STS 1024x1000	20.0 < 26.0	25.4	100
-	STS 1063x1000	22.0 < 27.0	25.0	100
-	*STS 1102x1000	24.0 < 28.0	25.4	100
-	STS 1260x1000	26.0 < 32.0	25.4	100
-	*STS 1338x1000	27.0 < 34.0	25.4	100
-	STS 1456x1000	30.0 < 37.0	25.4	100
-	STS 1535x1000	31.0 < 39.0	25.4	50
-	STS 1614x1000	33.0 < 41.0	25.4	50
-	*STS 1693x1000	36.0 < 43.0	25.4	50
-	STS 1772x1000	37.0 < 45.0	25.4	50
-	*STS 1810x1000	38.0 < 46.0	25.4	50
-	STS 1968x1000	42.0 < 50.0	25.4	50
-	*STS 2086x1000	45.0 < 53.0	25.4	25
-	STS 2205x1000	48.0 < 56.0	25.4	25
-	STS 2480x1000	50.0 < 63.0	25.4	25
-	STS 2520x1000	54.0 < 64.0	25.4	25
-	STS 2677x1000	58.0 < 68.0	25.4	25
-	STS 2953x1377	62.0 < 75.0	35.0	25
-	STS 3543x1535	75.0 < 90.0	39.0	10
-	STS 4055x1535	83.0 < 03.0	39.0	10
-	STS 5000x1968	90.0 < 127.0	50.0	5

Pull Plugs

Pull Plugs are designed to be used to mask a parallel "through" hole. The thin end "d" is fed through the hole and then the masking section "D" of the plug is pulled by the thin end through the hole. The masking section stretches as it is dragged through the hole, when it has reached the desired position the tension is released from the thin end, the masking section expands to seal the hole. Available in both Silicone & EPDM!

Fits		D	L	d	l	Qty. per
thread	Part Code	mm	mm	mm	mm	pack
-	SPP 0062	1.6	9.5	1.2	9.5	500
-	SPP 0067	1.7	15.9	1.2	15.9	500
M2	SPP 0073	1.9	15.9	1.2	15.9	500
-	SPP 0091	2.3	15.9	1.2	15.9	500
-	SPP 0093	2.4	15.9	1.6	15.9	500
M3	SPP 0109	2.8	15.9	1.6	15.9	500
-	SPP 0125	3.2	15.9	2.1	15.9	500
-	SPP0130x0625	3.3	15.9	2.1	15.9	500
M4	SPP 0140	3.6	15.9	2.1	15.9	500
-	PSP 0154	3.9	15.9	2.1	15.9	500
-	SPP 0156	4.0	15.9	2.1	15.9	500
-	SPP 0162	4.1	15.9	2.4	15.9	500
M5	SPP 0187	4.8	15.9	2.8	15.9	500
-	SPP 0195	5.0	15.9	2.8	15.9	500
M6	SPP 0218	5.5	25.4	2.8	25.4	500
-	SPP 0225	5.7	25.4	3.2	25.4	500
-	SPP 0257	6.5	25.4	3.3	25.4	500
M8	SPP 0275	7.0	24.1	3.3	24.1	500
-	SPP 0281	7.1	25.4	3.3	25.4	500
-	SPP 0312	7.9	25.4	3.7	25.4	500
-	SPP 0332	8.4	28.6	6.4	28.6	500
-	SPP 0335	8.5	25.4	4.0	25.4	500
M10	SPP 0350	8.9	22.9	4.0	25.4	500
-	SPP 0388	9.9	25.4	4.0	25.4	250
-	SPP0400x1000	10.2	25.4	4.0	25.4	250
-	SPP 0414	10.5	25.4	4.0	25.4	250
M12	SPP 0440	11.2	25.4	4.0	25.4	250
-	SPP 0445	11.3	25.4	4.0	25.4	250
-	SPP 0468	11.9	25.4	6.4	25.4	250
-	SPP 0500	12.7	25.4	6.4	25.4	100
-	SPP 0510	13.0	25.4	6.4	25.4	100
M14	SPP 0530	13.5	25.4	6.4	25.4	100
M16	SPP 0612	15.5	25.4	6.4	25.4	100
-	SPP 0640	16.3	25.4	9.5	25.4	100
M18	SPP 0700	17.8	25.4	9.5	25.4	100
-	SPP 0729	18.5	25.4	7.9	18.0	100
M20	SPP 0770	19.6	25.6	9.5	28.6	50
-	SPP 0809	20.5	25.4	7.9	18.0	50
-	SPP 0896	22.8	25.4	9.5	25.4	50
-	SPP 1020	25.9	25.4	9.5	25.4	50
-	SPP 1380	35.1	25.4	12.7	25.4	50

<<Contents

<Previous

Next>